Bank of presets for the Kemper - resolved

[vitchpat1]

Hi There, need some help to set up banks of presets with my Kemper.

I have 24 presets on my kemper that I want to manage with 2 Banks of 12 presets on my midi grande. The 24 presets of on the Kemper are set as Midi program change 1 to 24.

I have set up bank 1 with the first 12 presets whithout issue on the MG but as soon as I am setting up preset 1 and 2 of the bank 2, the preset 11 and 12 of the bank 1 are not retrieving the proper midi assignement event if it is still properly set on both Kemper and MG.

Thanks for your help
Patrick

[Microdesignum]

Hi Patrick,
I suppose that you have the presets programmed on MIDI Grande in this order:

Bank 1:
Register 1: 1 / 2 on red / green layer
Register 2: 3 / 4
Register 3: 5 / 6
Register 4: 7 / 8
Register 5: 9 / 10
Register 6: 11 / 12

Bank 2:
Register 1: 13 / 14
Register 2: 15 / 16
Register 3: 17 / 18
Register 4: 19 / 20
Register 5: 21 / 22
Register 6: 23 / 24

What does your Kemper Profiler do when you press Register 1 in Bank 2?

[vitchpat1]

Hi Patrick,
I suppose that you have the presets programmed on MIDI Grande in this order:

Bank 1:
Register 1: 1 / 2 on red / green layer
Register 2: 3 / 4
Register 3: 5 / 6
Register 4: 7 / 8
Register 5: 9 / 10
Register 6: 11 / 12

Bank 2:
Register 1: 13 / 14
Register 2: 15 / 16
Register 3: 17 / 18
Register 4: 19 / 20
Register 5: 21 / 22
Register 6: 23 / 24

What does your Kemper Profiler do when you press Register 1 in Bank 2?

Hi there, yes this is my set up. 
Register 1 in bank 2 will bring 13/red and 14/green etc. 
Thanks

[Microdesignum]

OK. And so what works incorrectly?

[vitchpat1]

As stated above as soon as I am setting up 13 and 14 of the bank 2, the 11 and 12 of the bank 1 are not retrieving the proper midi assignement event if it is still properly set on both Kemper and MG.

[Microdesignum]

Of course, but your description is still too general. Sorry for repeating the question but can you please specify what does the Register 6 in Bank 1 do? I suppose you would like that it should send PC#11 and 12 when you press it repeatedly. What does it do instead?

[vitchpat1]

I had to do make further investigation as it is a weird issue:

I can set registers 1 to 12 in bank one and 13 to 17 in bank 2 whithout issue but as soon as I set register 18 linked to Kemper program change 18, the register 11 and 12 in bank one will also retrieve PC18.

All PC in the Kemper are set properly and the register assignement on the midi grande is also accurate. I have check with another midi controller and I do not have this issue.

[vitchpat1]

Hi all, forgot to post that a simple reset to factory default has resolved the above issue.